Lifter test in a Faraday cage
By Jean-Louis Naudin
created on March 21, 2002 - JLN Labs - Last update March 21, 2002
All informations in this page are published free and are intended for private/educational purposes and not for commercial applications

The purpose of this test is to check if the Lifter is able to lift off and hover in a fully grounded Faraday cage.

Testing setup : The Lifter is placed in a Faraday cage ( 1 meter height and 0.5 m wide ). The Faraday cage is connected to the ground and the high voltage is sent to the Lifter through a special HV cable.

TEST RESULT : When the High Voltage is swiched on, the Lifter is hovering above the base, maintained on the base with 3 thin nylon threads to avoid that it escapes. ( see the photo below )


The Lifter work perfectly in a fully grounded Faraday cage

See the video of the Lifter test in a Faraday cage

To see the videos, the free downloadable RealPlayer is required

Click on the picture above to see the video ( 387 Kb )

Documents and references :

  • The Transdimensional Technologies web site

  • NASA patent application US 2002012221 " Apparatus and Method for generating a thrust using a two dimensional asymmetrical capacitor module " ( granted January 31, 2002 )

  • NASA PATENT US 6,317,310 ( granted November 13, 2001 )
    NASA MFS 31419_1 - Apparatus & Method for Generating Thrust Using a Two Dimensional, Asymmetrical Capacitor;

  • NASA Technology Opportunity - TOPS ( 11-06-01 )

    •

    See also :

    Email : JNaudin509@aol.com

    Return to the Lifters experiments page