The Newman's Energy Machine V1.0
By JL Naudin/M.David
created on 06/12/98 - JLN Labs - last update on 06/18/98
The main commutator wheel is made with an insulating material like Bakelite, Epoxy, Teflon, Ertalon..
The rotating contacts are made with copper or silver sheet and have rectangular shape glued on the wheel.
These rotating contacts are at 180 degrees and one on each side of the wheel, thus, when the brushes touch these contacts, the circuit will close. The polarity of the current is reversed in the coil for each half turn.
Each pair of brushes are made with a copper or silver sheet and must be separated by at least 10mm to prevent eventual sparks.
If you want to use the Newman's motor with a 12V DC Battery, you need only to connect the 12V DC power supply (below) instead of the 220/220V insulator transformer from the main power supply (above).
The Tuning and the oscilloscope pictures
If you need more informations or if you have any suggestions send me your Feedback
Email : JNaudin509@aol.com
Return to the Newman's Machine Main page