The Quantum Magnetic Motor Project
The Reed'motor - R&D by JL Naudin/M.David
created on 03-10-98 - JLN Labs - last update on 03-10-98
The main mechanism in the Reed's motor, can be explained like this :
The aluminum sheets has the purpose to reverse the Lenz Law effect and by this way to create an asymmetrical flow of magnetic energy which produce a continous torque on the rotor.
1) The aluminum sheet is placed in front of the stator magnets (
in the Rotor/Stator gap). When the magnet of the rotor is far
from the magnet of the stator, a constant magnetic field flow in
the aluminum sheet, (No flux variation = No Lenz law induction)
2) When the rotor approach the stator, the magnetic flux in the
aluminum sheet tend to COLLAPSE, due to the repulsive polarities
of the magnets. This effect CREATE A MAGNETIC FIELD in the
aluminum sheet (Foucault currents). This magnetic field has the
reverse polarity of the magnet pole of the rotor. For Instance,
if the Rotor/Stator are in N-N, the magnetic field created in the
aluminum sheet is in S-N polarity.
3) By this way the EM Field created in the aluminum sheet by the
rotor APPROACH tend to REDUCE THE REPULSION or in the best case
ATTRACT the rotor during the APPROACH PHASE, thus this give it
more kinetic energy...
The magnetic flux density in the aluminum sheet at the null zone
4) When the rotor LEAVE the stator, the process is reversed, the
magnetic field in the aluminum sheet tend to INCREASE because the
magnets are in repulsion. A counter magnetic field is created to
oppose to this increase and by this way a N-S pole appear in the
aluminum sheet.....The REPULSIVE FORCE IS STRONGER DURING THE
EXIT PHASE......
To summarize the main principle used in this motor :
- The use of aluminum sheet is very important, because this is a
mean for reversing the Lenz law effect.
- During the approach phase of the rotor on the stator, the
repulsive is reduced while the during the exit phase of the rotor
the repulsive force is increase.
- This resulting effect create an ASYMMETRICAL TORQUE on the
Rotor and is able to generate a CONTINUOUS ROTATION OF THE MOTOR
USING ONLY THE ENERGY OF THE PERMANENT MAGNETS......
The tuning is very accurate because the null zone must be located
exactly in the aluminum sheet for magnifying the main effect. The
ratio between the rotor speed, the aluminum sheets position in
the air gap and also the proportion (surface, thickness) of these
aluminum sheets must be very precise...
Today this is only a proposal and this explanation need to be verified experimentaly.
Jean-Louis Naudin
(on March 10, 1998)
(Thanks to M. David for his very helpful
support about this project)
See also the Reed's motor diagrams and pictures
Email
: JNaudin509@aol.com
Return to the Main page